192.168.50.1 Admin Login Router
192.168.50.1 C class private IP address used for local network configuration and few router brands use 192.168.50.1 or 192.168.55.1 as default Login IP address. SWEEX LW050V2, Sweex LW150, and other Sweex routers used 192.168.50.l as the default login LAN IP address for their modem and routers. If you have any brands cable modem, wireless router or DSL modems that default IP address 192.168.50.1 and not sure how to login 192.168.50.1 to access the router web interface to setup. Login manual for sweex router and other router using login IP addres 192168.50.1 is same, only require login username and password as per brands name and model numbers.
You can access the route with a 192.168.50.1 IP address either using a wired connection from a LAN port or wireless if the router supports wifi. Default login username and password for every brand might be different for the same IP 192.168.50.1 so first check the router sticker printed for login credential or find below.
Default Login Username and password
Default login settings for router, modem or Wifi router printed to router sticker or user guide comes with the box during first time purchase. If you want to access old router settings and not sure of default web interface settings then get the most used password and username combination work on most of the router.
Default Login IP address – 192.168.50.1
Keep ready login details for your router and proceed to the next steps.
Steps to access the web interface using default IP
If your DSL modem, router support only a LAN port and no wireless then you have only one way to access settings using wired. If your router or modem supports wireless then you can use wifi as well as lan wired connection to login modem.
· Power on the device using the DC adapter comes with a router.
· Connect Internet cable to WAN port if setup first time
· Use LAN cable and connect router LAN port to a PC laptop or use wireless SSID and password to connect using wifi connections.
· Go to TCP/IPv4 settings and make sure it in DHCP mode or use 192.168.50.11 for static mode.
192.168.101.1 Login Admin Password
Login Router Web interface
Open a web browser and access http://192.168.50.1 and wait to load login page asking for username and password. You will get the router login page to provide username and password and access router settings.
After login, you can change your wireless SSID name, Password, and other configuration settings that make your internet more secure.
Change Wireless SSID and Password
To change the default WIFI SSID and password you need to go to wireless settings.
Wireless SSID Network Name- Change WiFi name here.
Wireless Security Key- WPA/WPA2-PSK-AES
Password– Set a strong wireless password.
Along with updating the Wireless name and password default login password should also change during first time setup.
Change Sweex Router Login Password
Changing login password important as it is printed to router label and easily available on internet.
Go to System tools or Administration option to change login password depends on the route model number.
Old password – admin or password (use the same password you use for login router)
New Password– create a new password
Confirm New password– Confirm new password again.
Apply settings and login router again with the new password.
If you have a router, modem or wireless router printed with default LAN IP 192.168.50.1 but it seems not working for you or you may can’t log in router. If you forget the login password or IP address not working just reset the router to restore into default settings.
Reset Router to Restore 192.168.50.1
You can use the reset button if not access the login IP address or the default username and password printed to the router not working for your router model.
Steps to reset the router
· Locate a small reset button nearby the Ethernet port in the router or modem.
· Press the reset button and hold for 10-15 seconds and release when the power LED turns off and turns ON.
· Router will reboot automatically and take a few minutes to finish the restore setting.
· Check default login settings and follow the above guide to log in again.
This is a simple manual to login Sweex router and other brands that are using the default IP address 192.168.50.1.
- How to Reset an Arris Router or Modem
- 192.168.1.1 | How to login router
- Setup Tenda F3 WiFi Router-192.168.0.1
- 8 Best Open Source Alternate Firmware for Routers