Mikrotik Rb450gx4 Gigabit Router Login And Review
Mikrotik rb450gx4 is the upgraded version of the RB750GR3 router. MikroTrik RB450Gx4 is a 5 Gigabit port with 4 core CPU and 1 GB RAM. IF you looking for a MikroTik RB450gx4 review and configuration manual also available from the official Mikrtik website.
If you looking to upgrade the version of the RB750Gr3 router with higher RAM and CPU then the MikroTik RB450Gx4 router is the best upgrade without increasing the Ethernet port to buy a costly router such as the CCR series. Before proceeding to login to rb 450gx4 from Winbox or browser check the hardware and software specifications and review rb 450gx4 router to confirm whether it fits your requirements.
Login RB450Gx4 using Winbox or from a web browser is as simple as logging into any other Mikrotik routerboard. The login manual for RB450 is the same as the login RB750gx3 router. As RB450gx4 is a normal router without a WiFi option you can only access the device using a wired connection from any Ethernet port using Winbox or using the default Login IP address RB450gx4 is 192.168.88.1 from the browser.
MikroTik rb450gx4 Review and Specifications
While we choose any router for the network we must want to know the review and features available on the router that can fulfill your network requirement. If you already using an RB750Gr router or looking a higher router without increasing the Ethernet port to avoid increased pricing then rb450gx4 is the best Alternative to RB750gr3 with higher hardware.
MikroTik RB450Gx4 Specifications
Some important specifications of hardware and software that always should consider while buying a router for your network as given below.
| Product code | RB450Gx4 |
| CPU Core Count | 4 |
| RAM | 1GB |
| RouterOS license | 5 |
| Ethernet | 5x 10/100/1000mbps |
| Storage size | 512MB |
| DC jack input Voltage | 10-57 V |
| Number of DC inputs | 3 (DC jack, PoE-IN) |
| Check Price | BUY NOW |
To get the complete RB450Gx4 datasheet or user manual in PDF you can download it from Mikrotik’s official website. Now follow further steps to connect and login rb450gx4 router board.
Mikrotik Routerboard Rb450gx4 Connection and log in the first time
Login Mikrotik Routerboard RB450 gx4 device can be used by three ways. Winbox, from the web browser and using the telnet command prompt. Using Winbox you can use a Mac address or IP address to access routerOS and from the Browser you need a default IP address to log in.
- Power On RB450Gx4 using a DC adapter or using PoE in Port.
- Connect LAN cable from Eth2 to Eth5 from a Laptop/Desktop.
- Download Winbox Utility from Mikrotik Downloads.
- Open Winbox Utility and click on the Neighbors tab and you will find the RB450GX4 router.
- Select Mac address or IP address and press connect button. In default mode username is “admin” and there is no password.
- If using a browser use Mikrotik rb450gx4 login IP address 192.168.88.1 to url bar and login settings.
- Once you log in to routerOS you can configure the router WAN port, and WAN port as well as use as a hotspot login router with captive portal solutions.
Also, change the router default password during first-time login as there is no password configured for the RB450gx router in default settings.
How to Change Admin password for RB450Gx4?
Mikrotik RB450Gx routerOS is unsecured in default settings and needs to create a new password from Winbox as well as from the browser or using the command. Follow the steps to create a new password for Mikrotik router rb450gx4.
- Login to RouterOS using Winbox as follows above rb450gx4 userman manual.
- Go to left side menu System- Password tab
- Under password, you will get a window to create for new password.
- New password– Create a new password
- Confirm password– Confirm the new password again.
- Apply and save settings to confirm password change.
- After change the password your RB450Gx4 username “admin” and password as you set new password.
These are simple steps to log into the RB450gx4 routerboard for first-time configuration. RB450Gx4 can be used as a router, switch, firewall, hotspot gateway, and DHCP server as well as a load balance router and managing bandwidth for your network.
rb450gx4 firmware label is 5 so you get many rights to use the router with different features that usually not get in RB750Gr3 as the label is lower than RB450. To get more features do not forget to update RB450Gx4 when a new release comes which you can check by login router OS under the firmware option. If you trying to login configured RB450gx4 and forget password or something wrong while trying login then just use reset button to factory reset EB450Gx4 using hard reset method.
Related Post
- IPSec Site-to-Site VPN Configuration in Mikrotik router- 6 Steps
- Mikrotik RB750Gr3 Factory Reset If Forget Password – Reset Guide
- How to setup VPN in Mikrotik Router for Remote Access
- Mikrotik Port Forwarding from Winbox