10.0.0.1 Default Login username and password
10.0.0.1 is A class Network IP address that provides host address range from 10.0.0.1 to 10.255.255.254. 10.0.0.0.1 is subnet id for IP address 10.0.0.l used for private networks. Many leading network brands use default gateway IP addresses for Network switches, Router, firewall, and another device. 10..0.0.1 common default login IP address for Cisco, Asus, D-link, Xfinity router.
If you have any router or network device that login IP address printed 10.0.0.1 series and you have no idea how to access it then you are in the right place. Every router required a login username and password with default login IP details to access in factory mode. This post will help you to access default gateway IP address 10.0.0.1 and 10.0.0.2.
If you Xfinity Comcast modem, Asus Wi-Fi router, and Cisco router you can access router with default login IP address with admin username and password.
The default username and password for 10.0. 0.1
Every wireless access point and router pre-configured with factory settings that use to log in the first time.
The default login IP address and username password usually printed to the router label and the user manual comes with the device.
Login password and username for 10.0.0.1 can be different depends on the router brands and models. However, some common usernames and passwords used for many different brands.
Login IP : 10.0.0.1
Username password
admin admin
admin password
cusadmin highspeed
cisco cisco
cusadmin password
These are some common login credentials used by various brand routers.
Steps to Login default gateway 10.0.01 from the web browser
You need to connect the router with the computer either physical connection or wireless connection.
Use RJ45 LAN cable for wired connection to the router Ethernet port to PC Ethernet port.
Turn on the device using the power adapter that comes with the router.
Configure Computer/Laptop LAN network IP Address
Go to Network adapter settings and open Ethernet properties to configure the same series IP address to access 10.0.0.0.1.
Exp: configure 10.0.0.3 or 10.0.0.254 or any other IP address from 10.0.0.0 network.
Open Web browser and http //10.0.0.0.1 and press the enter key to load the login page.
Provide username and password as printed to your router sticker or use default settings from the above steps.
Once you logged into router settings you can change the WiFi SSID network name, Wireless security key, Login password, LAN IP address, and other settings.
If you are facing any issue while login to the default IP address then follows the below step to fix the login issue.
Default Gateway IP 10.0.0.1 Not working
If you unable to access 10.0.0.1 IP address and it might be taking too long time to respond. These type problems can come if network misconfiguration and the IP address does not belong to the router.
Follow the steps to fix the https //10.0.0.1 login problem.
- Make sure the IP 10.0.0.01 is default login IP for the Xfinity router login and router brand you want to access. See the backside label to confirm the router IP address.
- Make sure you are using http://10.0.0.1 correct form instead of using http//:10.0.0.1
- Command to check default Gateway of your Router.
Open command prompt from the start menu or
Press Windows Key+ R key
Type CMD in RUN windows and press OK button
The command prompt will open.
Type “ipconfig” command and press enter key.
You will gate network IP configuration details.
Default Gateway IP: 10.0.0.1
This will be your router login IP address to open the settings page.
If you login password not working for 10.0.0.1 IP address you may try factory reset router to restore default settings.
Step to Factory reset 10-0-0-0-1 using the reset button
Resetting a router is a feature for fail-safe mode and available in any brand router whether using Comcast Xfinity, Technicolor, Cisco, or Arris modem for the internet.
Factory reset option available soft reset and hard reset. Software reset can execute after login router settings and a hard reset do not require to log in.
If your forget your username or login password you have the only way to access the router is hard reset it with the button that erases all configurations.
Step to Hard reset Router
- Turn on your Wireless router or the modem device.
- Locate the reset button beside the Ethernet port in the router.
- Press and hold the reset button for 10-15 seconds using a needle.
- Release the reset button once power LED blinking and the router rebooting.
- After rebooting router access default login IP address printed to router manual or sticker.
Final Word
Although IP addresses 10.0.1 commonly used for default login IP address for many different brands for factory settings. Based on this user guide to access router settings, if your router default login IP address is 10.1.10.1, 192.168.2.1, 192.168.1.1 can follow the steps above to access settings.
Related Post
- How to Login Arris T25 WiFi Cable Modem
- Netgear Nighthawk ac1900 router setup first time
- How to Login Arris T25 WiFi Cable Modem
- How to secure WiFi in Home and Office