Login Time Warner Router to change WiFi password

Motorola SBG6580 Time Warner Router Login

I am sure you are a user of Time Warner Cable internet service because you are reading this user guide. You might want to login time warner router to change WiFi SSID, password or upgrade firmware to keep it problem-free.  There is a lot of third party router supported by time warner cable service from leading modem brands.

Arris, Motorola, Technicolor, Cisco, Netgear some popular modem those are compatible with Spectrum time warner cable services. We already published a user guide to login to Arris modem, Technicolor modem login. In this article, you will get a simple user manual to login time warner router Motorola SBG6580 cable wifi modem.

You need to connect the time warner router wired or wireless connection to login to the web interface. Follow steps by steps on how to log in time warner Wifi router to access the settings page.

• How to Check Who is connected to My WiFi

Steps to login Time Warner Router

This tutorial uses the Motorola SBG680 wifi cable modem to login time warner service.

Initial steps are the connection with the modem using an Ethernet wire connection or Wireless connection.

Connect your PC using Wired LAN cable or wi-fi from Laptop.

You need Time warner default login settings to access web GUI.

• 192.168.1.1 | How to login router

Default login settings for Time Warner

The default setting for the time warner cable approved modem list to setup the first time.

Default Time Warner Login IP Address and Username password work different combinations depending on the router brand and models.

Time warner cable login IP address: 192.168.0.1

Modem                                              Username                        Password

Arris                                                            admin                              password

Arris/Motorola SBG6580                       admin                              Motorola

Technicolor/Thomson/RCA                   admin                              password

Thomson/RCA DWG875A                      no username                      admin

Ubee/Ambit                                                user                                      user

Ubee/Ambit DDW36C /DVW 32CB       admin                                see device label*

Login Router in the Web browser

Open web browsers such as internet explorer, chrome or any other and access http://192.168.0.l and press enter key.

After a few seconds, you will get a router login page asking for a login username and password to authenticate.

Use username passwords as printed to modem label or try the above combination.

How to Add second router in the same Network

Change WiFi SSID network name

TWC wifi setting available under the wireless tab as shown below image.

Go to Wireless– Primary Network settings

1:  Primary Network: Enabled

Network name SSID: Motorola-3BE50 ( change this default TWC SSID with new WIFi name)

2: now change time warner cable wifi passwords.

WPA/WPA2 Encryption: AES

WPA Pre-shared key: twc-wifi-password (set a stronger wifi password)

• Comcast XFINITY Approved Modems and Routers

Tips to change WiFi Password

Few Points you should always keep in mind while changing wifi password TWC router and modems.

• Always use the mix key combination password include alfa numeric and special character.
• Never use wifi password your mobile number, Date of birth or address that can easily guess.
• Keep change WiFi password time to time to secure WiFi internet

Press the Apply button to save settings.

 

Next steps to secure home network changes time warner router login password from the default password.

How to change TWC Login Password and Username

Login password settings available under the status tab.

Status- Security

Select Change Username option to change the username

Enter Current username: admin (default)

Enter current password: admin (use your current password)

Enter new users name: the set new username you want

Re-Enter New username: type new username again to confirm.

To change Login Password

Select the Change password option.

Enter Username: admin

Enter Current Password: admin or password (use your current password if you already change)

Enter New password: twc-login-password (create new login password)

Re-Enter New password: type new password again to confirm.

Apply settings to confirm and logout router and login with a new username and password to confirm changes.

This is a simple way to login TWC router to change wifi settings. In case you facing trouble while login into router settings or May default login IP not working then read below steps to fix the login issue.

• How to Factory Reset D-Link WiFi Router

Time Warner Login IP Address Not working

If you cant access twc login IP address due to any network configuration issue or something else.

Make sure IP Address you access is printed to the router label and not already changed.

Make sure your Laptop/desktop LAN settings in DHCP mode.

You can check PC Lan settings detail to confirm gateway IP obtain by pc that is login IP for the router.

IF still facing the error then you can go hard reset of TWC router.

• How to Solve This site can’t be reached Error

How to Factory reset Time Warner router?

Every modem and router provide an option to the fail-safe mode in case of login settings not working.

• Make the Factory reset router using the reset button available at the router.
• See a small reset button or small hole for making router reset to default.
• Use any needle to press the reset button.
• Press and hold the reset button for 10-15 seconds and release button.
• Wait until router rebooting and ping default login IP address as printed to router sticker.

 

Try login router again with default settings.

Related Post

•  How to Login Asus router Settings 192.168.1.1
• Airtel ZeroTouch Broadband Login and Setup
• Factory Reset of MikroTik Router | 3 Method
• How to login and setup TP-Link AC1200 IP 192.168.0.1